IBM totalstorage 200, Руководство по установке оборудования

Страница: 23 / 152

Use the M6 screws to attach the hinge bracket
to the rear of the rack. Then, use the hinge
pin to attach the cable-management
assembly to the slide rail. (Right rear of rack
shown here).
4
Use the pins on the slide rail to align the
slide rail to the rack. Use the M6 screws to
bolt the slide rail to the rack (left front of rack
shown here). Repeat this step for the other
slide rail.
A
6
A
A
3
A
5
B
A
Fully extend the slide rails out of the rack. Lift
the
above the rails; then, rest the
rack-support wheels located on the rear of the
on the slide rails. Lower the front of
the onto the slide rails.
Be sure the bracket notches on the
front of the fit securely on the tabs
located on the front of the slide rails.
appliance
appliance
appliance
appliance
Note:
A
Use the M4 screws to secure the appliance to
the rails. Unscrew the rack-support wheels
and store them in a safe place. Caution: To avoid injury, do not place your
fingers around the rack-support wheels when
lowering the onto the rails.
appliance
B
B
A
A
B
C
C
Chapter 2. Installation procedures
9