IBM Thinkpad X30 Series, Руководство по обслуживанию и устранению неисправностей

Страница: 33 / 100

Solution:
The pointer might drift when you are not using the TrackPoint during
normal operation. This is a normal characteristic of the TrackPoint and is
not a defect. The pointer drifts for several seconds under the following
conditions:
v
When the computer is turned on.
v When the computer resumes normal operation.
v When the TrackPoint is pressed for a long time.
v
When the temperature changes.
Problem:
The mouse or the pointing device does not work.
Solution:
Make sure that the TrackPoint is set to Automatic in the ThinkPad
Configuration Program. Then detach the mouse or the pointing device,
and try using the TrackPoint. If the TrackPoint works, the error might be
due to the mouse or the pointing device.
Make sure that the cable for the mouse or the pointing device is securely
connected to the X3 UltraBase, the ThinkPad Dock, the ThinkPad Dock II,
the ThinkPad Mini Dock, the ThinkPad Port Replicator, or theThinkPad
Port Replicator II.
If your mouse is incompatible with the IBM PS/2 mouse, disable the
TrackPoint, using the ThinkPad Configuration Program.
Note: For more information, see the manual supplied with the mouse.
Problem
The mouse buttons do not work.
Solution
Change the mouse driver to Standard PS/2
®
Port Mouse , and then
reinstall IBM PS/2 TrackPoint. Drivers are provided in the
C:\IBMTOOLS\DRIVERS directory on your hard disk drive. If your hard
disk drive does not contain device drivers, refer to the ThinkPad Web site.
To access this Web site, open Access IBM by pressing the Access IBM
button.
Problem
The scrolling or magnifying glass function does not work.
Solution
Check the mouse driver in the Device Manager window, and make sure
that the IBM PS/2 TrackPoint driver is installed.
Standby and hibernation problems
Problem:
The computer enters standby mode unexpectedly.
Solving computer problems
Chapter 2. Solving computer problems
21