IBM ThinkPad R32 2658, Дополнительное руководство

Страница: 43 / 94

Recover pre-installed software
If the data on your hard disk drive is damaged or accidentally erased, you
can restore the software that was shipped with your computer. This software
includes your pre-installed operating system, applications, and device drivers.
To restore your pre-installed software, you can use the Product Recovery
program.
The Product Recovery program is in a section of your hard disk drive that is
not displayed by Windows Explorer.
Note: The recovery process might take up to 2 hours.
Attention
All of the files on the primary hard disk partition (usually drive C) will
be lost in the recovery process. Be sure to back up copies of the files you
have saved on your drive C before you begin.
Note: You might need to use a diskette drive in the recovery process. Use a
drive that is compatible with your computer.
To use the Product Recovery program to restore your pre-installed software,
do the following:
1. Save all your files and shut down your desktop.
2. Turn off your computer.
3. Turn on your computer. Quickly press F11 when this message is displayed
on the screen:
″
To start the Product Recovery program, press F11.
″
This
message is displayed for only a few seconds.
Note: If this message is not displayed, you can use a Recovery Repair
diskette to get access to the Product Recovery program.
4. From the list displayed on the screen, select Full recovery.
5. Select the recovery options you want, and follow the instructions on the
screen.
6. Restart the system. Your computer will restart with the pre-installed
operating system, drivers, and software.
Solving computer problems
Chapter 2. Solving computer problems
31