IBM ThinkPad 770X, Руководство пользователя, Страница: 86 / 229

Card ID
I/O port address
IRQ level
COM number of the serial port
Memory window address
Memory window size
Card offset address
5
Click on the OK button, and save the changes.
To cancel the changes, click on the Cancel button.
Updating the CONFIG.SYS File
For PC Card Director to work correctly, the PC Card device drivers
must be registered in the CONFIG.SYS file. These drivers are
automatically registered in the CONFIG.SYS file when you install PC
Card Director following the instructions in Installing a New Operating
System and Its Device Drivers.
The following section describes the standard rules for each driver
registered in the CONFIG.SYS file for your reference.
Registered Drivers and Standard Rules
The following is a sample of a CONFIG.SYS file:
:
BASEDEV=PCMCIA.SYS --→ Card Services
BASEDEV=IBM2SS14.SYS --→ Socket Services
BASEDEV=AUTODRV2.SYS --→ Auto Configurator
DEVICE=C:\THINKPAD\VPCMCIA.SYS --→ Virtual Card Services
:
DEVICE=C:\THINKPAD\xxxxxxx.SYS --→ Storage card device driver
:
REM PC_Card_Client_Device_Driver
:
DEVICE=C:\THINKPAD\$ICPMOS2.SYS --→ Power Management Support driver
Rule 1 Card Services and Socket Services must be listed before any
other PC Card drivers.
Rule 2 The PC Card Power Management Support driver must be listed
after all drivers, at the end of the CONFIG.SYS file.
Rule 3 When using storage cards, the device drivers must be installed
according to the card type.
78
IBM ThinkPad 770X Online Book