IBM ThinkPad 770X, Руководство пользователя

Страница: 183 / 229

If the administrator's password (supervisor password) is set, but you
did not specify it when you started Easy-Setup, you cannot use these
functions.
Enabling or Disabling Wake on LAN
This setting is used to enable or disable the Wake on LAN feature,
which enables your computer to be powered on remotely by a
network administrator from a management console. Remote
network-management software, such as LCCM and NetFinity, must
be used to support Wake on LAN.
Notes:
1. This feature is valid only when a LAN adapter card with Wake on LAN is
installed in the docking station, and its signal line and auxiliary power
line are connected to the adapter. The enable or disable setting in your
computer is independent of what is set for the docking station.
2. When the Wake on LAN cables are connected to the docking station
correctly and the Wake on LAN function of your computer is “disabled” in
Easy-Setup, your computer is switched on when the server sends a
“wake” signal to it. Your computer's POST (Power On Self Test)
recognizes the Wake on LAN status of your computer and switches off a
few seconds after switching on. This is not an error; however, the
network administrator should not set Wake on LAN for LAN cards of the
docking station systems connected to ThinkPad computers in which
Wake on LAN is disabled.
Setting Up in Easy-Setup
You can enable or disable Wake on LAN from the Easy-Setup menu.
When Wake on LAN is enabled, the network administrator can power
on remote machines connected on a LAN by using remote
network-management software. Disable the function when your
computer is not under the network administrator's system
management.
To set this function, do either of the following:
1
Go to the Easy-Setup menu.
2
Click on the CONFIG icon.
The “Configuration” window appears.
Chapter 9. Using System Management
175