IBM ThinkPad 760E, Инструкция по эксплуатации

Страница: 190 / 331

Installing OS/2 Software
760
CD
If you are using a 760ED and installing the CD-ROM
version of OS/2 Warp using the CD-ROM drive, select one
of the following according to your configuration:
– To use the CD-ROM drive and an externally attached
diskette drive, go to page 172.
– To use the CD-ROM drive and the internal diskette
drive by switching between them, go to page 173.
Important
You need at least 90MB of free space on the hard
disk drive.
Installing OS/2 Warp Using an External Diskette Drive
1
Ensure that DOS and Windows are installed in the computer.
2
Insert the OS/2 Warp CD-ROM into the CD-ROM drive.
3
Open the DOS command prompt and change to the drive for
the CD-ROM drive.
4
Type
CDINST
and press Enter.
Make copies of the OS/2 Warp diskettes labeled “OS/2 Warp
Installation Diskette” and “OS/2 Warp Diskette 1.”
5
Shut down OS/2 and turn off the computer.
6
Insert the OS/2 Warp Installation Diskette into the external
diskette drive and turn on the computer.
7
When you are prompted to insert OS/2 Warp Diskette 1, insert
it into the external diskette drive and the OS/2 Warp CD-ROM
into the CD-ROM drive.
172
IBM ThinkPad 760E, 760ED, or 760EL User's Guide