IBM ThinkPad 600, Руководство по техническому обслуживанию аппаратной части

Страница: 45 / 124

Checkout Guide
test by showing FRU code 11, use the following procedure
to isolate the problem:
1. Run the system board test to verify the symptom.
This test verifies both the system board and the CPU
card. If no error is detected, return to “Checkout
Guide” on page 30.
Note
Don't touch the keyboard and pointing device
when the system board test is running. This
might cause an unexpected error.
2. If FRU code 10 appears, replace the system board
but do not replace the CPU card. Remove the CPU
card from the old system board and install it to the
new system board.
3. If FRU code 11 appears, reseat the CPU card.
4. Rerun the test to verify the fix.
5. If FRU code 11 remains, replace the CPU card.
If this procedure does not correct the problem, go to the
“Undetermined Problems” section for each model.
TrackPoint Checkout
If the TrackPoint does not work, check the configuration in
the ThinkPad Configuration program. If the configuration
of the TrackPoint is disabled, select Enable to enable it.
If this does not correct the TrackPoint problem, continue
with the following. After you use the TrackPoint, the
pointer drifts on the screen for a short time. This
self-acting pointer movement can occur when a slight,
steady pressure is applied to the TrackPoint pointer. This
symptom is not a hardware problem. No service actions
are necessary if the pointer movement stops in a short
period of time.
If a click button problem or the pointing stick problem
occurs, do the following:
1. Go to the Easy-Setup menu.
2. Select an item with the pointing stick.
3. Press any one of the click buttons.
4. Verify that the item is selected.
5. Move to another item with the pointing stick.
6. Press the pointing stick (press-to-select), and verify
that the item is selected.
Note
This step is only for the model that has the
press-to-select function.
7. Verify that all buttons work correctly.
If either the pointing stick or the click button do not work,
do the following actions one at a time to correct the
problem. Do not replace a nondefective FRU.
General Descriptions
39