IBM ThinkPad 380Z Скачать руководство пользователя страница 48

Страница: 48 / 157

Resources

Drivers

Attributes

Note:

The following information appears depending on the type of
PC Card:

Slot:

The slot number and assigned name for the slot.
(You can change the slot name by selecting slot
management from the options menu.)

Card:

The type of this PC Card.

Manufacturer:

The manufacturer of the PC Card.

Size:

The storage capacity of the PC Card.

Drive:

The drive letter.

Battery status:

The charge status of the SRAM Card battery.

Write protect:

The write protect status—either enabled or disabled.

File system:

The file system used by the PC storage.

Port:

The communication port used by this PC modem
card.

Resources

Note:

Some resource information is not relevant to all types of PC
Cards. These nonrelevant resources are displayed as “Not
Applicable.”

IRQ:

The interrupt request being used.

I/O:

The starting and ending addresses of the
input/output range for the PC Card.

DMA:

The DMA channel used.

Memory range: The range of physical memory.

Drivers

Note:

CardWizard determines the type of device driver being used.
It also displays whether the card is configured by Windows 95
or by CardWorks.

IBM ThinkPad 380Z Online User's Guide

Содержание ThinkPad 380Z






























































































































































Результаты поиска

Содержание ThinkPad 380Z

Отзывы:

IBM ThinkPad 380Z, Руководство пользователя, Страница: 48 / 157

Результаты поиска

Содержание ThinkPad 380Z

Отзывы: