IBM ThinkCentre 8104, Руководство по замене аппаратных средств

Страница: 35 / 38

7. Reconnect the external cables and power cords to the computer. See “Locating
the connectors on the rear of your computer” on page 2.
8.
If you are replacing the system board, you must update (flash) the BIOS, see
“Updating (flashing) BIOS from a diskette or CD-ROM.”
9. To update the configuration, see “Starting the Setup Utility” in the Quick
Reference that was included with your computer.
Updating (flashing) BIOS from a diskette or CD-ROM
Important
Start the Setup Utility program to view your system information. See
“Starting the Setup Utility” in your Quick Reference . If the serial number and
the machine type/model listed on the Main menu do not match what is
printed on the label of your computer, you must update (flash) the BIOS to
change the serial number and the machine type/model.
To update (flash) the BIOS from a diskette or CD-ROM, do the following:
Note: An optional USB diskette drive is required to update (flash) BIOS from a
diskette.
1.
Insert a system program update (flash) diskette or CD-ROM into the diskette
drive or optical drive. System program updates are available at
http://www.ibm.com/pc/support/ on the World Wide Web.
2. Turn on the computer. If it is on already, you must turn it off and back on
again. The update begins.
3. When you are prompted to select a language, press the number on your
keyboard which corresponds to the language then press Enter.
4.
When prompted to change the serial number, press Y.
5. Type in the seven character serial number of your computer then press Enter.
6.
When prompted to change the machine type/model, press Y.
7. Type in the seven character machine type/model of your computer then press
Enter.
8. Follow the instructions on the screen to complete the update.
Chapter 2. Replacing hardware
27