Superior performance/U in a 4-socket, 2U server
Please see the Legal Information section for important notices and information.
15
For More Information
IBM System x Servers and Options
http://
ibm.com
/systems/x
IBM Standalone Solutions Configuration Tool
http://
ibm.com
/systems/x/hardware/configtools.html
IBM Configuration and Options Guide
http://
ibm.com
/systems/x/hardware/configtools.html
IBM ServerProven Program
http://
ibm.com
/systems/info/x86servers/serverproven/compat/us
Technical Support
http://
ibm.com
/server/support
Other Technical Support Resources
http://
ibm.com
/systems/support
Legal Information
© IBM Corporation 2010
IBM Systems and Technology Group
Dept. U2SA
3039 Cornwallis Road
Research Triangle Park, NC 27709
Produced in the USA
August 2010
All rights reserved
For a copy of applicable product warranties, write to: Warranty
Information, P.O. Box 12195, RTP, NC 27709, Attn: Dept.
JDJA/B203. IBM makes no representation or warranty
regarding third-party products or services including those
designated as ServerProven or ClusterProven
®
. Telephone
support may be subject to additional charges. For onsite labor,
IBM will attempt to diagnose and resolve the problem remotely
before sending a technician.
IBM, the IBM logo, ibm.com, Active Energy Manager, Active
Memory, Chipkill, ClusterProven, ServeRAID, ServerGuide,
ServerProven, System Storage, System x, Wake on LAN, and
X-Architecture are trademarks of IBM Corporation in the
United States, other countries, or both. If these and other IBM
trademarked terms are marked on their first occurrence in this
information with a trademark symbol (
®
or ™), these symbols
indicate U.S. registered or common law trademarks owned by
IBM at the time this information was published. Such
trademarks may also be registered or common law
trademarks in other countries. A current list of IBM trademarks
is available on the Web at
http://
ibm.com
/legal/copytrade.shtml
.
Linux is a registered trademark of Linus Torvalds.
Microsoft, Windows, and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation.
Other company, product and service names may be
trademarks or service marks of others.
IBM reserves the right to change specifications or other
product information without notice. References in this
publication to IBM products or services do not imply that IBM
intends to make them available in all countries in which IBM
operates. IBM PROVIDES THIS PUBLICATION “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of
express or implied warranties in certain transactions;
therefore, this statement may not apply to you.
This publication may contain links to third party sites that are
not under the control of or maintained by IBM. Access to any
such third party site is at the user's own risk and IBM is not
responsible for the accuracy or reliability of any information,
data, opinions, advice or statements made on these sites. IBM
provides these links merely as a convenience and the
inclusion of such links does not imply an endorsement.
Information in this presentation concerning non-IBM products
was obtained from the suppliers of these products, published
announcement material or other publicly available sources.
IBM has not tested these products and cannot confirm the
accuracy of performance, compatibility or any other claims
related to non-IBM products. Questions on the capabilities of
non-IBM products should be addressed to the suppliers of
those products.
MB, GB and TB = 1,000,000, 1,000,000,000 and
1,000,000,000,000 bytes, respectively, when referring to
storage capacity. Accessible capacity is less; up to 3GB is
used in service partition. Actual storage capacity will vary
based upon many factors and may be less than stated.
Performance is in Internal Throughput Rate (ITR) ratio based
on measurements and projections using standard IBM
benchmarks in a controlled environment. The actual
throughput that any user will experience will depend on
considerations such as the amount of multiprogramming in the
user’s job stream, the I/O configuration, the storage
configuration and the workload processed. Therefore, no
assurance can be given that an individual user will achieve
throughput improvements equivalent to the performance ratios
stated here.
Maximum internal hard disk and memory capacities may
require the replacement of any standard hard drives and/or
memory and the population of all hard disk bays and memory
slots with the largest currently supported drives available.
When referring to variable speed CD-ROMs, CD-Rs, CD-RWs
and DVDs, actual playback speed will vary and is often less
than the maximum possible.
XSO03119-USEN-00
