A cost-optimized storage-rich alternative to traditional enterprise 2U dual-socket servers
Please see the Legal Information section for important notices and information.
4
allows an administrator to restart a server without having to visit it in person, saving travel time
and getting the server back up and running quickly and securely. It also adds new features to
those provided by IPMI 1.5, including
VLAN
support,
Serial over LAN
, enhanced
authentication and encryption algorithms (
RMCP+
and
AES
) and a
firmware firewall
.
•
Temperature-controlled fans
adjust to compensate for changing thermal characteristics. At
the lower speeds they draw less power and suffer less wear. Equally important in a crowded
data center, temperature-controlled fans produce less ambient noise in the data center than if
they were constantly running at full speed.
•
The
three-year (parts and labor) limited onsite warranty
5
helps afford you peace of mind
and greater investment protection than a one-year warranty does.
Key Features
High-Performance / High-Efficiency Xeon 5600 / 5500 Processors
The x3620 M3 supports up to two high-performance Intel
Xeon
5600
Series or
5500
Series
processors, allowing you to upgrade to a second processor as your business needs require. The
x3620 M3 offers a choice of processor clock rates, memory access speeds and energy draw,
including:
•
95W 6-core
Xeon
5600
models
X5650
running at 2.66GHz
with reduced power draw and
impressive performance/watt
(only
15.83W
per core;
6.4GTps
QPI speed),
12MB
of L3
processor cache,
1333MHz
memory access, 2 threads per core, and Intel Turbo Boost and
Hyper Threading technology
•
80W
4-core Xeon
5600
models
E5620
or
E5630
running at 2.4 or 2.53GHz, respectively, with
reduced power draw
and
impressive performance/watt (
20W
per core;
5.86GTps
QPI speed),
12MB
of L3 processor cache,
1066MHz
memory access, 2 threads per core, and Intel Turbo
Boost and Hyper Threading technology
•
80W
4-core Xeon 5500 models
E5506
or
E5507
running at 2.13 or 2.26GHz, respectively, with
reduced power draw and impressive performance/watt (
20W
per core;
4.8GTps
QPI speed),
4MB
of L3 processor cache, and
800MHz
memory access
Also available, via configure-to-order (CTO):
•
60W 6-core
Xeon
5600
low-voltage
model
L5640
running
at 2.26GHz with low power draw
and impressive performance/watt (only
10W
per core;
5.86GTps
QPI speed
)
, and
12MB
of
shared
L3
cache,
1333MHz
memory access, 2 threads per core, and Intel Turbo Boost and
Hyper Threading technology (CTO only)
•
40W
4-core Xeon
5600
low-voltage
model
L5630
running
at 2.13GHz, with extremely low
power draw and amazing performance/watt (only
10W
per core;
5.86GTps
QPI speed),
12MB
of L3 processor cache,
1066MHz
memory access, 2 threads per core, and Intel Turbo Boost
technology
With the Xeon 5500 and 5600 Series processors, Intel has diverged from its traditional Symmetric
Multiprocessing (SMP) architecture to a Non-Uniform Memory Access (NUMA) architecture. The
processors are connected through serial coherency links called QuickPath Interconnect (QPI).
QPI is capable of 6.4, 5.6 or 4.8 GTps (gigatransfers per second), depending on the processor
model.
4-core Xeon
processors contain
four complete processor cores
. Each 5600 Series processor
contains one
12MB L3
cache shared by all the cores. The shared cache is dynamically allocated
among the cores as needed. The multiple cores appear to software as multiple physical
processors. Four- and six-core processors offer considerably higher performance than a same-
speed Xeon processor with 2 cores.
Turbo Boost Technology
increases performance by translating the temperature, power and
current head room into higher frequency. It will dynamically increase by 133MHz for short and
regular intervals until the upper limit is met or the maximum possible upside for the number of
active cores is reached. The maximum frequency is dependent on the number of active cores.
The amount of time the processor spends in the Turbo Boost Technology state depends on the
workload and operating environment, providing the performance you need, when and where you
need it. For example, a
2.66GHz
6-core X5650
processor with
3-6
cores active can run the cores
at
2.93GHz
. With only
one
or
two
cores active, the same processor can run those cores at
3.06GHz
. Similarly, a
2.4GHz
4-core E5620
processor can run at
2.53GHz
or even
2.66GHz
.
When the inactive cores are needed again, they are dynamically turned back on and the
processor frequency is adjusted accordingly.
In processors implementing
Intel Hyper-Threading Technology
, each core has two threads
capable of running an independent process. Thus, a 6-core processor can run
12
threads
5
For terms and conditions or copies of the IBM Statement of Limited Warranty, call 800-772-2227 in the U.S. In Canada call 800-
426-2255. Telephone support may be subject to additional charges. For warranties including onsite labor, a technician is sent after
IBM attempts to resolve the problem remotely. International warranty service is available in any country in which this product is
sold.
