IBM System x3400 M3 Types 7378, Инструкция по установке и эксплуатации

Страница: 69 / 154

Installing the air baffle
To install the air baffle, complete the following steps:
1. With the rear (hinged) part of the air baffle lifted up, align the positioning pins on
the ends of the air baffle with the locating holes in the server chassis and fan
cage assembly.
2. Slide the air baffle down into the server
1
until the positioning pins fit into the
locating holes; then, press down on the air baffle until the pinch tab clicks into
place.
3. Rotate the rear (hinged) part of the air baffle
2
down to the system board.
Note: Make sure that the power-supply cage cables are not caught under the
air baffle.
4. Return the power-supply cage to its closed position (see “Closing the
power-supply cage” on page 56).
5. Install the hot-swap power supply or power supplies (see “Installing a redundant
power supply” on page 98).
6. Install and lock the left-side cover (see “Completing the installation” on page
98).
7. Reconnect the external cables and power cords; then, turn on the attached
devices and turn on the server.
Installing the fan cage assembly
Attention:
v Replace a hot-swap fan within 30 seconds of removal.
v
To ensure proper cooling and airflow, do not operate the server for more than 30
minutes with the left-side cover removed.
To install the fan cage assembly, complete the following steps.
1. Align the fan cage assembly with the guide rails on the sides of the chassis.
Note: Make sure that both release buttons click into place.
Chapter 2. Installing optional devices
53