Component
Status
3
Drive
Displays the drive information:
Status (
OK
,
Degraded
, or
Failed
).
Drive Status displays
Empty
,
Loading
, or
Ejected
when the drive is empty, loading media, or media is ejected/unloaded in
the drive. It displays
Cleaning
when the cleaning cartridge is in the drive, and Calibrating while performing media
optimization. See
Vendor ID
Product ID
Serial number
F/W version (firmware)
Worldwide ID (node name)
Encryption method (
None
)
4
Accessor
Displays the accessor status (
OK
,
Degraded
, or
Failed
).
5
Cartridge
Displays the cartridge information
Media status (
OK
,
Degraded
, or
Failed
)
Cartridge label that is detected by the bar code reader.
Encryption setting for data cartridges (
Not encrypted
,
Encrypted
, or
Unknown
)
Remain - Number of uses left for cleaning cartridges. When a cleaning cartridge is added to the library (I/O station or cleaning
slot), the remaining uses is displayed as 50. The actual remaining uses are updated when the cleaning cartridge is loaded into
the tape drive.
Write protect (
Yes
or
No
)
Note: Write protect status is only detected and displayed when a cartridge is in a drive.
6
Slots
Each column has a spring loaded mechanism that pushes the cartridges into Tier 1. Moving a second cartridge into a column moves
the first cartridge into Tier 2.
Note:
1. Cartridges cannot be moved directly from Tier 1 in one column to Tier 2 in another column in a single move operation
(intermediate move operations are required).
2. Cartridges cannot be moved to the accessor with Move command. However, cartridges can be moved from the accessor with
this command if the library was powered OFF with a cartridge that is still held in the accessor.
Configuring the library
Users that can access the library are added, modified, or removed by using the Web User Interface. Up to seven users can be configured with the Web User
Interface.
Configure the physical and logical library settings.
After the network settings are entered on the Operator Panel, the current network configuration of the library can be modified with the Web User Interface. The
changes that are made to the network settings take effect after the library is rebooted.
Configuring date and time settings
Email notifications can be configured to notify you when a library event takes place.
SNMP notifications can be configured for this library.
Uploading and configuring the SSL certificate
Saving and restoring configuration settings
Managing user access
Users that can access the library are added, modified, or removed by using the Web User Interface. Up to seven users can be configured with the Web User Interface.
Figure 1. User Access screen
TS2900 Tape Autoloader
31
Содержание System Storage TS2900
Страница 1: ...TS2900 Tape Autoloader IBM...