manualshive.com logo in svg

IBM Storwize V5100 MTM 2078-424, Быстрое руководство по установке

"IBM Storwize V5100 MTM 2078-424" - производственное хранилище данных высокой производительности, идеально подходит для предприятий любого размера. Для быстрой установки доступно бесплатное скачивание Руководства по быстрой установке на сайте manualshive.com. Обеспечьте надежное хранение данных с IBM Storwize V5100 MTM 2078-424.

Поделиться
Скачать
background image

• From 4 to 12 DDR4 (288p socket) DIMMs in 12 DIMM slots in each node canister, supported as base

memory and cumulative, sequential upgrades:
– 32 GB per node canister as 2 x 16 GB DIMMs (default base installation)
– 96 GB per node canister as 6 x 16 GB DIMMs (the first upgrade of 64 GB raises the cumulative total

to 96 GB total memory per canister)

– 288 GB per node canister as 6 x 16 GB DIMMs and 6 x 32 GB DIMMs (the second upgrade of 192 GB

raises the cumulative total to 288 GB total memory per canister)
Note: The control enclosure has two canisters. To reach the system total cache of 576 GB, multiply

the above figure of 288 GB by two.

For other differences, see the system overview in the Knowledge Center.

Verify environmental requirements

The environmental and electrical requirements for the physical site must be met to ensure that your

system works reliably.
Before you install a system, you must verify that adequate space in a suitable rack is available. You must

also ensure that the requirements for power and environmental conditions are met.
The quick installation guide assumes that you have completed the physical planning for the environment

of your system. If you have not done the environmental planning for your system, see the " physical

installation planning" topic in the IBM Knowledge Center for the product. Complete the planning tasks

and worksheets before you install and initialize your system.
If your system contains more than one control enclosure, configure a Fibre Channel switch for correct

zoning between control enclosures for best results. See the configuring topics in IBM Knowledge Center

that contain information about zoning rules and zoning details.
To verify that your environment can support 2077-424 , see Appendix C, “Control enclosure

requirements,” on page 95.
To verify that your environment can support expansion enclosures for 2077-424 , see Appendix D, “SAS

expansion enclosure requirements,” on page 101.

Review enclosure location guidelines

Installing a control enclosure only
If you are installing a control enclosure only, follow these guidelines.

• Position the enclosure in the rack so that you can easily view it and access it for servicing.
• Locate the enclosure low enough for the rack to remain stable.
A fully assembled enclosure, containing drives, node canisters, power supplies units, and all possible

features weighs approximately 45 kg (99 lb), requiring three people to lift. For installation by a single

person, reduce the system down to manageable components by removing the drives from the front of the

enclosure and node canisters and power supply units from the rear of the enclosure before you attempt

to move the enclosure.

Installing a control enclosure and one or more expansion enclosures

If you are installing a control enclosure plus one or more expansion enclosures, follow these guidelines.

Chapter 1. Before you begin the installation  9

Содержание Storwize V5100 MTM 2078-424

















































































































































Отзывы:

Нет отзывов

Похожие инструкции для Storwize V5100 MTM 2078-424

E-Bench KH 2340 User Manual preview
KH 2340
Бренд: E-Bench Страницы: 22
Sanyo DC-007C Manual preview
DC-007C
Бренд: Sanyo Страницы: 6
Sanyo DC -X1000MD Service Manual preview
DC -X1000MD
Бренд: Sanyo Страницы: 41
Philips FW 356C Specifications preview
FW 356C
Бренд: Philips Страницы: 2
Philips FW 61 User Manual preview
FW 61
Бренд: Philips Страницы: 24
Philips DTD3190/98 Specifications preview
DTD3190/98
Бренд: Philips Страницы: 3
Philips FW 358C Instructions For Use Manual preview
FW 358C
Бренд: Philips Страницы: 24
Philips FW 11 Instructions For Use Manual preview
FW 11
Бренд: Philips Страницы: 16
Philips FW 359C Instructions For Use Manual preview
FW 359C
Бренд: Philips Страницы: 27
Philips FMW154 User Manual preview
FMW154
Бренд: Philips Страницы: 19
Philips FW 10 Instructions For Use Manual preview
FW 10
Бренд: Philips Страницы: 17
Philips FCD 585 Operating Manual preview
FCD 585
Бренд: Philips Страницы: 18
Philips FW 356C Instructions For Use Manual preview
FW 356C
Бренд: Philips Страницы: 29
Philips FW 26 User Manual preview
FW 26
Бренд: Philips Страницы: 24
Philips FW 21 Instructions For Use Manual preview
FW 21
Бренд: Philips Страницы: 24
Philips F 400 Instructions For Use Manual preview
F 400
Бренд: Philips Страницы: 20
Philips DCM3065 User Manual preview
DCM3065
Бренд: Philips Страницы: 19
Philips DCM3160 User Manual preview
DCM3160
Бренд: Philips Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды