IBM Storwize V5000E, Быстрое руководство по установке

Страница: 37 / 120

Chapter 3. Before you begin the installation
Before you can begin installing your system, you must unpack and verify your order and make other
preparations.
The Quick Installation Guide contains a set of instructions to help you unpack and install your system. The
guide is divided into three chapters.
1. The steps in Chapter 3, “Before you begin the installation,” on page 13 (the chapter you are now
reading) involve verifying your order, becoming familiar with the hardware component terminology,
and ensuring that you have met the environmental requirements.
2. The steps in Chapter 4, “Installing the system hardware,” on page 23 involve installing the hardware
and attaching the data cables and power cords.
3. Chapter 5, “Configuring the system,” on page 75 helps you create your configuration file and access
the management GUI. The management GUI guides you through the initial configuration process.
Important information:
• This guide presumes that you have read the planning information regarding your physical environment
that is available in the IBM Knowledge Center for Storwize V5000E .
• Ensure that any cables that you are supplying are available for installation.
Be familiar with the following information
• See “Caution notices for the system” on page xiv and “Danger notices for the system ” on page xvii for a
summary of the situations that can be potentially hazardous to you. Before installing, read and
understand the following caution and danger statements.
• Use safe practices when lifting. The fully populated enclosure weighs about 37 kg (82 lbs). At least
three people are required to lift and install the enclosure into the rack or to remove an enclosure from
the rack.
CAUTION: Use safe practices when lifting.
(27)
Also keep in mind that a rack full of equipment is extremely heavy.
DANGER: Heavy equipment–personal injury or equipment damage might result if mishandled.
(D006)
• The following general precautions should be observed, even though the power-on steps differ slightly
from the directions that you will follow for this product:
DANGER: When working on or around the system, observe the following precautions:
Electrical voltage and current from power, telephone, and communication cables are hazardous.
To avoid a shock hazard:
– If IBM supplied a power cord(s), connect power to this unit only with the IBM provided power
cord. Do not use the IBM provided power cord for any other product.
– Do not open or service any power supply assembly.
©
Copyright IBM Corp. 2019, 2020 13