IBM StorageSmart DF1100R, Руководство оператора

Страница: 25 / 52

2. With one hand giving support to the base of the disk drive module and the
other hand holding the handle
«1¬
, insert the module and push it into the slot.
When the handle touches the front surface of the unit, the module stops. Note
that the module is not yet fully inserted.
3. While continuing to push the disk drive module into the slot, slowly close the
handle
«1¬
until it stops with a click. This action fully inserts the module into
the connector at the back of the slot.
Attention:
The fans might decrease in speed.
Figure 16. Adding a Disk Drive Module
Figure 17. Closing the Handle of a Disk Drive Module
Chapter 2. Adding Disk Drive Modules
15