IBM Slicestor 2584, Руководство по установке, Страница: 21 / 42

Chapter 3. Installing the appliance into a rack
There are many racks on the market, which means that the assembly procedure might differ slightly.
Mounting the system into a rack
Follow these steps to install the rails to the rack and to the enclosure.
CAUTION:
Ensure that you have fitted and checked a suitable anti-static wrist or ankle strap and observe all
conventional ESD precautions when handling modules and components. Avoid contact with backplane
components, module connectors, and other potential sources of ESD. ESD damage is not covered by
warranty.
Note: Rail Kit Adjustment Range:
Inside of the front post to inside of the rear post: 281 in. - 348 in. (713mm - 884mm). Suits a 1-meter-deep
rack (39 in.) within Rack Specification IEC 60297.
Note: A Torx T20 screwdriver is needed to lock and unlock the drawers.
CAUTION:
A populated enclosure can weigh up to 100lb (45kg). Do not try to lift it by yourself.
Note:
The rail location pins are pre-assembled to suit square and round hole racks only.
© Copyright IBM Corp. 2016, 2018
7