IBM ServeRAID M5025, Руководство пользователя

Страница: 36 / 86

2-4 ServeRAID M5025 SAS/SATA Controller Hardware Installation
Attention: To avoid damage to the computer, always remove the
controller from the PCI Express slot before you relocate or
ship the computer.
Figure 2.1 ServeRAID M5025 Controller Installation in a
PCI Express Slot
Step 7. Configure and Install the SAS Devices, the SATA II Devices, or
Both in the Host Computer Case
Configure the SAS devices, SATA II devices, or both, and
install them in the external enclosure.
Note: See the documentation for the external devices for pre-
installation configuration requirements.
Step 8. Connect the SAS Devices, the SATA II Devices, or Both to the
Controller
Use SAS cables to connect SAS devices, SATA II devices, or
both to the ServeRAID M5025 controller. Refer to
Section 2.5,
“Connecting the ServeRAID M5025 Controller to a Drive
85040-11
Edge of
Motherboard
iBBU (Top View)
32-bit slots
(3.3 V)
PCIe
slot
Bracket Screw
64-bit slots
(3.3 V)
Press here
Press here
Pb
LSI 31503-00
Rev
. B
Caution:
Danger
of
expl
osion
if battery
is
incorr
ectly
replaced.
Replace
with
sam
e
or
equi
valent
type
recomm
ended
by
m
anufacturer
.
Dispose
o
f u
sed
b
atteri
es
a
ccordi
ng
to
m
anufactur
er'
s instructi
ons.
e1
Pb
ASSEMBLED
IN USA
.
WWYYN0000