IBM ServeRAID-4 Ultra160 Series, Справочник пользователя

Страница: 49 / 208

Click (
Create arrays
) on the tool bar to switch from Information mode
to Configuration mode.
2. Continue with one of the following:
v
“Using Configuration mode”.
v
“Using Information mode” on page 39.
Using Configuration mode
You can use Configuration mode to create up to eight independent disk arrays for
each ServeRAID controller. Configuration mode provides two configuration options:
Express configuration and Custom configuration (see Figure 8 on page 30). You can
also use Custom configuration to create spanned arrays and configure the logical
drive to RAID level-x0. For more information about RAID level-x0, refer to
“Understanding RAID level-x0” on page 22.
Figure 9. Information mode window
Chapter 4. Configuring ServeRAID controllers
31