IBM RS/6000 7025 F50 Series Скачать руководство пользователя страница 43

Страница: 43 / 362

Step 1520-1

You may be directed to this MAP for several reasons:

1. There is no indication of activity when the start/stop switch is pressed. None of

the LEDs light and none of the fans, including the fan in the power supply, start
to turn.

Go to “Step 1520-2.”

2. When the start/stop switch is pressed, the system begins to power on, but the

power LED does not stay on.

Go to “Step 1520-3” on page 2-14.

Step 1520-2

1. Turn the power off.

2. Check that the external power cable to the system unit has continuity.

3. Check that the power outlet has been wired correctly with the correct voltage.

4. Check that the external power cable is plugged into both the system unit and the

power outlet.

Did you find a problem?

Go to “Step 1520-3” on page 2-14.

YES

Correct the problem. Go to "MAP 410: Repair Checkout" in the

IBM

RS/6000 Diagnostic Information for Multiple Bus Systems.

Chapter 2. Maintenance Analysis Procedures

2-13

Содержание RS/6000 7025 F50 Series










































































































































































































































































































































































Результаты поиска

Содержание RS/6000 7025 F50 Series

Отзывы:

IBM RS/6000 7025 F50 Series, Руководство по обслуживанию, Страница: 43 / 362

Результаты поиска

Содержание RS/6000 7025 F50 Series

Отзывы: