IBM RS/6000 7025 F50 Series Скачать руководство пользователя страница 235

Страница: 235 / 362

Replacement

1. With one hand, touch any metal surface of the chassis to minimize static

electrical charges, and then pick up the memory card.

2. Open the retainer hooks.

Attention: To prevent damage to the card and the card connectors, open and
close the retainer hooks at the same time.

3. Remove the connector cover if you are installing the card in an unused memory

card slot.

4. Place the memory card in the card guide rails.

5. Make sure that the black tabs on the new card are captured by the retainer

hooks.

6. Align the card with the connector.

7. Close the retainer hooks to set the card.

Attention: To prevent damage to the card and the card connectors, open and
close the retainer hooks at the same time.

Chapter 6. Removal and Replacement Procedures

6-27

Содержание RS/6000 7025 F50 Series










































































































































































































































































































































































Результаты поиска

Содержание RS/6000 7025 F50 Series

Отзывы:

IBM RS/6000 7025 F50 Series, Руководство по обслуживанию, Страница: 235 / 362

Результаты поиска

Содержание RS/6000 7025 F50 Series

Отзывы: