IBM RDX, Руководство пользователя

Страница: 15 / 44

Front panel
The front panel of the RDX drive has a combined power-indicator LED and eject
button, and a manual-ejection hole. The RDX cartridge has a cartridge-indicator
LED.
The eject button is illuminated by a power-indicator LED. It shows the status of
the drive. Table 1 describes the meaning of the status of the power-indicator LED.
Note: In order to successfully eject the RDX cartridge from the drive bay, the RDX
utility software must be installed. If the RDX utility software is not
installed, the RDX cartridge will not be ejected and the power-indicator LED
will remain steady green.
Table 1. Reading the power-indicator LED
LED status Meaning RDX drive status
Off No power The drive does not have power.
Steady green Ready The power is on, and the drive is working.
Flashing green Ejecting The cartridge is ejecting.
Steady amber Fault The drive has detected a fault condition. For more
information, use the RDX utility software to run a
diagnostic test (see the documentation that comes
with the software).
Flashing amber Prevent The user pressed the eject button while the
cartridge is in the process of reading, writing, or
seeking. The cartridge ejects and the indicator
returns to a steady green after the process
completed.
The cartridge-indicator LED displays the status of the cartridge. Table 2 on page 6
describes the meaning of the status of the cartridge-indicator LED.
Manual-ejection
hole
Cartridge-indicator
LED
Power-indicator
LED and eject
button
Figure 5. Front panel components
Chapter 1. Introduction
5