Chapter 2: Getting Connected
26
IBM Internet Security Systems
Completing the Initial Configuration
Introduction
The Setup Assistant is the program you use to configure initial appliance
network settings. After you complete the initial setup process, use
Proventia Manager to change and manage these settings.
Procedure
To complete the initial configuration for the appliance from the Setup
Assistant:
1. At the unconfigured login prompt, type the following login
credentials, and then press
ENTER
:
■
Username = admin
■
Password = admin
2. Click Start, and then press
ENTER
.
3. Follow the on-screen instructions to complete the Setup Assistant.
The following table describes the required information:
Tab
Task
Tab Description
License Key
Install the appliance
license keys
Download the antispam and antivirus keys for the appliance.
You will not be able to update signatures for the mail security
database without these keys.
Passwords
Set the passwords for
the appliance
Set the following required passwords for appliance access:
•
Root—This password is used to log on to the appliance
directly or to log on using SSH.
•
Administrative—This password is used to connect to the
management console using the Web browser.
Note: All passwords can be the same as the root password.
Network
Assign a host name to
the appliance
Provide a fully qualified domain name for the appliance like in
the following example:
appliance.example.com
Table 8:
Configuration tasks
Содержание Proventia
Страница 4: ...Contents 4 IBM Internet Security Systems ...
Страница 8: ...Preface 8 IBM Internet Security Systems ...
