IBM Power S1014, Руководство по установке

Страница: 25 / 38

c. In the contents area, select your managed system.
d. Click Change Licensed Internal Code for the current release.
5. To power on a managed system, see Starting a system(http://www.ibm.com/support/
knowledgecenter/POWER10/p10haj/crustartsys.htm)
6. Create partitions using templates.
• If you are creating new partitions, you can use the templates that are on your HMC. For more
information, see Accessing the template library (http://www.ibm.com/support/knowledgecenter/
POWER10/p10efc/p10efc_accessing_template_library.htm).
• If you have existing partitions on another system, you can capture those configurations,
save it to the template library and deploy the partition template. For more
information, see Partition templates (http://www.ibm.com/support/knowledgecenter/POWER10/
p10efc/p10efc_partition_template_concept.htm).
• If you want to use an existing template from another source, you can import that and use it. For more
information, see Importing a partition template (http://www.ibm.com/support/knowledgecenter/
POWER10/p10efc/p10efc_import_partition_template.htm).
7. Install an operating system and update the operating system.
• Install the AIX operating system. For instructions, see Installing AIX (http://www.ibm.com/support/
knowledgecenter/POWER10/p10hdx/p10hdx_installaix.htm).
• Install the Linux operating system. For instructions, see Installing Linux (http://www.ibm.com/
support/knowledgecenter/POWER10/p10hdx/p10hdx_installlinux.htm).
• Install the VIOS operating system. For instructions, see Installing VIOS (https://www.ibm.com/
support/knowledgecenter/POWER10/p10hb1/p10hb1_vios_install.htm).
• Install the IBM i operating system. For instructions, see Installing the IBM i operating system (http://
www.ibm.com/support/knowledgecenter/POWER10/p10hdx/p10hdx_ibmi.htm).
Completing the server setup without using an HMC
If you do not have an Hardware Management Console (HMC), use this procedure to complete the server
setup.
About this task
To complete the server setup without using a management console, complete the following steps:
Procedure
1. To check the firmware level on the managed system and the time of day, complete the following steps:
a. Access the Advanced System Management Interface (ASMI). For instructions, see
Accessing the ASMI without an HMC (www.ibm.com/support/knowledgecenter/POWER10/p10hby/
connect_asmi.htm).
b. On the ASMI Welcome pane, note the existing level of server firmware in the upper-right corner
under the copyright statement.
c. Update the time of day. In the navigation area, expand System Configuration.
d. Click Time of Day. The content pane displays a form that shows the current date (month, day, and
year) and time (hours, minutes, and seconds).
e. Change the date value, the time value, or both, and click Save settings.
2. To start a system, complete the following steps:
a. Open the front door of the managed system.
b. Press the power button on the control panel.
The power-on light begins to flash faster.
Installing the IBM Power S1014 (9105-41B) 11