IBM POWER GXT135P Graphics PCI Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 32

IBM POWER GXT135P Graphics PCI Скачать руководство пользователя страница 18

Troubleshooting

You can often resolve initial installation problems by following a few basic
troubleshooting steps in the following sequence:

1. Checking Cables

2. Checking Installed Software (lslpp)

3. Checking Console (possibly redirect)

4. Checking Installed Hardware (lsdev)

Checking Cables

1. Ensure your cables are connected to the correct adapter.

v

If you have more than one display adapter, be sure that each adapter is
connected to a display.

v

Verify the cable connection to your video monitor is made through either a
high-density 15-pin D-shell connector or a 24-pin DVI connector. (For detailed
connector information, go to

Adapters, Devices, and Cable Information for

Multiple Bus Systems

.)

2. If no login prompt appears, restart your system unit.

3. If the login prompt still does not appear, reset your system to its original

configuration and continue with the Troubleshooting verifications.

Verifying AIX Software Installation

1. Verify that the device driver for the POWER GXT135P Graphics PCI Adapter is

installed as follows:

v

Log in as root user.

v

Type the following:

lslpp -l all | grep GXT135P

Press Enter.

2. If the POWER GXT135P device driver is installed, the following is an example of

the data that displays if you are running AIX Version 4.3 or AIX Version 5.1:

devices.pci.14103302.X11 4.3.3.0 COMMITTED AIXwindows GXT135P Graphics

devices.pci.14103302.diag 4.3.3.0 COMMITTED GXT135P Graphics Adapter

devices.pci.14103302.rte 4.3.3.0 COMMITTED GXT135P Graphics Adapter

or

devices.pci.14103302.X11 5.1.0.0 COMMITTED AIXwindows GXT135P Graphics

devices.pci.14103302.diag 5.1.0.0 COMMITTED GXT135P Graphics Adapter

devices.pci.14103302.rte 5.1.0.0 COMMITTED GXT135P Graphics Adapter

3. If the POWER GXT135P Graphics PCI Adapter device driver did not install, return

to “Chapter 3. Installing Device Driver Software” on page 5. For AIX 4.3 or AIX 5.1,
use the

Additional Device Driver Software

CD included with your adapter.

8

Installation and Using Guide

«
...
16
17
18
19
20
...
»

Содержание POWER GXT135P Graphics PCI

































Отзывы:

Нет отзывов