IBM PC 300GL Types 6275, Краткое руководство пользователя

Страница: 16 / 54

7.
Connect any universal serial bus (USB) device cables to the USB
connectors.
8. Connect external audio device cables, such as speakers, microphone, or
headphone cable to the appropriate connector (available on some models
only.)
9.
For models with a modem, connect the phone-line cable to the modem
connector. For models with an Ethernet feature, connect the Ethernet cable
to the Ethernet connector.
Important
To operate the computer within FCC Class A or Class B limits, use a
category 5 Ethernet cable.
10.
Connect the power cords into properly grounded electrical outlets.
Note: When the power cord is first plugged in, the computer might turn
on for a few seconds, then turn off. This is normal.
Turning on power
Turn on the monitor and other external devices first. Turn on the computer.
When the self-test is done, the IBM
®
logo screen disappears. If your computer
has preinstalled software, the software installation program begins.
If you experience any problems during startup, refer to “Chapter 3. Getting
help, service, and additional information” on page 13“Chapter 3. Getting help,
service, and additional information,” on page 13.
4
Quick Reference