Hardware Installation 2-1
Chapter-2
Hardware Installation
This ch apter provides the information on how to install the hardware of
NuPRO-630. At first, please follow up sections 1.3, 2.1 and 2.2 in check the
delivery package and carefully unpacking. Following after, the jumpers setting of
switch, watchdog timer and the DiskOnChip
address selection etc.
2.1 Caution of Static Electricity
The NuPRO-630 has been well package with an anti-static bag in protect its
sensitive computer components and circuitry from the damage of static electric
discharge.
Note: DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE
COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC
PROTECTION.
You should follow the steps as following to protect the board in against the
static electric discharge whenever you handle the board:
1. Please use a grounding wrist strap on whoever needs to handle the
NuPRO-630. Well clip the ALLIGATOR clip of the strap to the end of the
shielded wire lead from a grounded object. Please put on and connect the strap
before handle the NuPRO-630 for harmlessly discharge any static electricity
through the strap.
2. Please use anti-static pad for put any components or parts or tools on the pad
whenever you work on them outside the computer. You may also in use the
anti-static bag instead the pad. Please ask from your local supplier in help up
your necessary parts on anti-static requirement.