Printer power supply–removing and replacing
Follow these steps to remove or replace the printer power supply.
1. Power off the NetVista Kiosk. See “Powering off the NetVista Kiosk” on page 4.
Make sure that the 4835, printer, scanner, power distribution switch, and the
UPS are powered off.
2. Unplug the power cord
A
from the external ac power source going to the
Kiosk enclosure.
3. Unplug the printer power supply power cord
B
from the power distribution
strip.
4. Unplug the 24V dc power-supply cable from the power connector
C
on the
printer. Remove the cable retainer so it is free from the enclosure.
5. Remove the four screws
D
on the printer power supply
E
.
6. Loosen the three screws
F
of the power supply
E
, and the front
G
and
rear
H
brackets.
7. To restore the printer, do the above procedure in reverse.
B
C
D
D
E
F
G
H
A
The NetVista Kiosk-DBCS Model
25
Содержание NetVista Kiosk DBCS
