IBM NetVista A20, Быстрая справка

Страница: 27 / 60

1.
If you are recovering your software using a Product Recovery CD , insert the
CD into the CD drive and continue at the next step. If you are using the
Product Recovery program on the hard disk, continue at the next step.
2. If possible, shut down your operating system normally.
3. If your computer is still on, turn it off.
Note: If the computer will not turn off after you hold down the power
button for at least four seconds, unplug the power cord and wait a
few seconds before reconnecting it.
4. Turn on your computer. If you are using the Product Recovery Program
(not the
Product Recovery CD ), quickly press F11 when the Product Recovery
Program prompt displays (this displays for only a few seconds). Wait for
the product recovery menu to display.
Note: If you are attempting to recover from a Product Recovery CD and
your computer will not boot from the CD, go to “Changing the
startup sequence” and select
CDROM as the 1st Boot Device.
5.
You might have a choice of operating systems to recover. Select the
operating system you are recovering.
6. Select your recovery option and follow the instructions on the screen.
7. When recovery is complete, exit from the program and remove the CD (if
present) from the CD drive.
8. Restart the computer.
Note: If you recover Windows NT Workstation, the hard disk must be
partitioned before all hard disk drive space is available. For information on
partitioning the remainder of your hard disk, see
Changing the operating
system in Access IBM.
Changing the startup sequence
If you inserted a CD in the CD drive and your computer does not read the CD
on startup, change the First Startup Device using the Configuration/Setup
Utility program.
To change the startup sequence:
1. If your computer is already on when you start this procedure, shut down
the operating system, turn off the computer, and wait a few seconds until
all in-use lights go off.
2.
Turn power on and look for the Configuration/Setup Utility program
prompt. Quickly press F1 when the prompt displays.
3. From the Configuration/Setup Utility menu, select Start Options .
4. From the Start Options menu, select Startup Sequence .
Chapter 2. Troubleshooting and software recovery
13