IBM NetVista 6058, Руководство по техническому обслуживанию аппаратной части

Страница: 24 / 248

Diagnostic Error Code FRU/Action
015-015-XXX USB port External Loopback
failure
1. Remove USB device(s) and re-test
2.
System board
015-027-XXX
USB port Configuration/Setup
error
1. Flash the system
2. System board
015-032-XXX USB port Device Controller failure
1. System board
015-034-XXX USB port bufferallocation failure
1. Reboot the system
2.
Flash the system
3. Run memory test
4. System board
015-035-XXX USB port Reset condition detected
1. Remove USB device(s) and re-test
2. System board
015-036-XXX USB port Register error
1.
System board
015-040-XXX USB port IRQ failure
1. Run setup and check for conflicts
2. Flash the system
3.
System board
015-195-XXX USB port Test aborted by user
1. Information
2. Re-start the test, if necessary
015-196-XXX USB port test halt, error threshold
exceeded
1. Press F3 to review the log file
2. Re-start the test to reset the log file
015-197-XXX USB port test warning
1.
Make sure the component that is called out is
connected and/or enabled
2. Re-run test
3. Component that is called out in warning statement
4.
Component under test
015-198-XXX USB port test aborted
1. If a component is called out, make sure it is
connected and/or enabled
2. Flash the system and re-test
3.
Go to the
″
Undetermined problems
″
section
015-199-XXX USB port test failed, cause
unknown
1. Go to the
″
Undetermined problems
″
section
2. Flash the system and re-test
3.
Replace component under function test
018-000-XXX
PCI Card Test Passed
1. No action
10
Hardware Maintenance Manual: IBM NetVista Computer Types 6058, 6059, 6269, 6568, 6569, 6578, 6579, 6648,
6649