IBM MT 2877, Руководство по техническому обслуживанию аппаратной части

Страница: 50 / 220

Note: Recharging will take at least 3 hours, even if the
indicator does not turn on.
If the voltage is still less than +11.0 V dc after
recharging, replace the battery.
4. If the voltage is more than +11.0 V dc, measure the
resistance between battery terminals 4 and 5. The
resistance must be 4 to 30 K .
If the resistance is not correct, replace the battery
pack. If the resistance is correct, replace the system
board.
Checking the backup battery
Do the following:
1. Power off the computer, and unplug the ac adapter
from it.
2. Turn the computer upside down.
3. Remove the battery pack (see “1010 Battery pack
(14.1-in. LCD models)” on page 72).
4. Remove the backup battery (see “Checking the battery
pack” on page 43).
5. Measure the voltage of the backup battery. See the
following figure.
Red (+)
Black (-)
Wire Voltage (V dc)
Red +2.5 to +3.2
Black Ground
v
If the voltage is correct, replace the system board.
v If the voltage is not correct, replace the backup battery.
v
If the backup battery discharges quickly after
replacement, replace the system board.
Checkout guide
44
MT 1871/1872/1875/1876