IBM MT 2369, Руководство по обслуживанию

Страница: 59 / 142

FRU tests
The following table shows the test for each FRU.
FRU Applicable test
System board 1. Diagnostics --> CPU/Coprocessor
2. Diagnostics --> Systemboard
3. If the docking station or the port replicator is
attached to the ThinkPad computer, undock
it. Place the computer on a horizontal
surface, and run Diagnostics --> Other
Devices --> IBM HDD Active Protection
Test.
Note: Do not apply any physical shock to the
computer while the test is running.
Power Diagnostics --> Other Devices --> IBM AC
Adapter , IBM Battery 1 (IBM Battery 2)
LCD unit 1. Diagnostics --> Video Adapter
2. Interactive Tests --> Video
Modem, MDC
or BMDC
1. Make sure the modem is set up correctly.
2. Replace the modem jack and the modem
card in turn, and run the following test in
Diagnostics --> Communication :
a. Conexant Smart Modem Interrupt
b. Conexant Smart Modem Dialtone
Audio 1. Interactive Tests --> Internal Speaker
2. Diagnostics --> Other Devices --> Analog
Devices AC97 CODEC Test
Speaker Interactive Tests --> Internal Speaker
PC Card slots 1. Diagnostics --> Systemboard --> PCMCIA
2. Insert a PC Card Wrap Plug into every PC
Card Slot, and run Diagnostics -->
Systemboard --> PCMCIA External Loop
Keyboard 1. Diagnostics --> Systemboard -->
Keyboard
2. Interactive Tests --> Keyboard
TrackPoint or
pointing device
If the TrackPoint does not work, check the
configuration in the ThinkPad Configuration
program. If the TrackPoint is disabled, select
Enable to enable it.
After you use the TrackPoint, the pointer may
drift on the screen for a short time. This drift
can occur when a slight, steady pressure is
applied to the TrackPointing Stick. This
symptom is not a hardware problem. If the
pointer stops after a short time, no service
action is necessary.
If enabling the TrackPoint does not correct the
problem, continue with the following:
v
Interactive Tests --> Mouse
(continued)
Product overview
ThinkPad X40
55