IBM Models 5, Руководство по обслуживанию

Страница: 69 / 146

Removing the speakers
Follow these steps to remove the speakers:
1. Switch OFF the power to the IBM AnyPlace Kiosk. Unplug the power cord
from the external power source.
2. Follow the steps in “Removing the front cover/touch assembly” on page 55 to
remove the front assembly.
3. Remove the two screws (
W
in Figure 36) that retain each speaker and lift to
remove.
4. Detach each speaker cable (
V
) from the control card.
5.
To replace, reverse these steps.
W
V
Figure 36. Removing the speakers
Removing and replacing FRUs
Chapter 4. Removing and replacing FRUs
57