IBM LTO, Руководство пользователя

Страница: 24 / 70

Accessing tapes from the front magazine
Refer to the previous illustration. To access tape cartridges from the front
magazine, do the following.
1.
Pull the unlocked door down to access the magazine and tapes.
2. Remove the magazine by fully depressing the release button on the bottom of
the magazine while pulling the magazine out with the tab.
3.
Use the magazine carrying handle to lift it out from the autoloader.
4. To remove a tape, grasp the top and bottom corners of the tape, and pull the
tape straight out of the magazine.
Do not hold the magazine handle down
when you are removing tapes. When the handle is depressed, the tapes are
locked in place.
5. To insert a tape, slide the cartridge directly into a slot, ensuring the
write-protect switch faces out and at the bottom of the magazine. Push the tape
into the slot until it “clicks” into place.
6. Using the magazine tab, guide the magazine into the back of the autoloader by
sliding it across the inside of the door until it aligns with the guide tracks and
clicks into place. Close the door. The autoloader runs an inventory check.
7.
If the tape is not positioned correctly inside the slot, try pushing the tape in
again until it clicks into place.
Accessing tapes from the internal back slots
Refer to the following illustration. To access tape cartridges from the internal back
slots, do the following.
1. Unplug the power cord from the back of the autoloader.
16
LTO Autoloader: User’s Guide