IBM LS42 - BladeCenter - 7902, Руководство по установке

Страница: 16 / 56

6. If you are installing a new expansion unit, touch the static-protective package
that contains the expansion unit to any unpainted metal surface on the
BladeCenter unit or any unpainted metal surface on any other grounded rack
component; then, remove the expansion unit from the package.
7. Orient the expansion unit above the blade server.
8. Lower the expansion unit so that the slots at the rear slide down onto the
cover pins at the rear of the blade server.
9. Pivot the expansion unit closed. The connectors on the expansion unit
automatically align with and connect to the connectors on the blade server
system board.
10.
Tighten the extraction device (thumbscrew) to secure the expansion unit to the
blade server.
11. If you have any options to install in the MPE, do so now (see “Installing
options in the Multiprocessor Expansion Unit” on page 9).
12.
Install the cover from the blade server on to the MPE. The following
illustrations show how to install the cover.
13. Install the blade server and MPE into the BladeCenter unit (see “Installing the
blade server in a BladeCenter unit” on page 11).
6
IBM BladeCenter: LS42 Multiprocessor Expansion Unit