IBM IntelliStation Z Pro 6221, Руководство по установке

Страница: 58 / 110

Using the built-in configuration programs
The following configuration programs are provided with your computer:
v
Configuration/Setup Utility
This program is part of the basic input/output system (BIOS) code that comes
with your computer. You can use this program to configure serial- and
parallel-connector assignments, change the drive startup sequence, set the date
and time, and set passwords. For more information about how to start this utility,
see “Starting the Configuration/Setup Utility program.”
v LSI Logic Configuration Utility
With the built-in LSI Logic Configuration Utility program, you can configure the
integrated SCSI controller and the devices that are attached to it. For information
about how to start this utility, see “Starting the LSI Logic Configuration Utility
program.”
v ServeRAID Manager
The ServeRAID
™
programs come with your computer. If your computer has a
ServeRAID controller installed, you must use the ServeRAID Configuration
program to define and configure your disk-array subsystem before you install
your operating system. See “Using ServeRAID Manager” on page 39 for more
information.
Note: See the User’s Guide on the IBM IntelliStation Documentation CD for
detailed instructions for using the configuration programs.
Starting the Configuration/Setup Utility program
Configuration/Setup is a menu-driven utility that is part of the BIOS code that comes
with your computer. You can use it to:
v
Configure serial connector assignments
v
Change the drive startup sequence
v Enable USB keyboard and mouse support
v
Resolve configuration conflicts
v Set the date and time
v
Set passwords
Complete the following steps to start the Configuration/Setup Utility program:
1. Turn on the computer and watch the monitor screen.
2. When the message
Press F1 for Configuration/Setup
appears, press the F1
key.
3. Follow the instructions that appear on the screen.
Starting the LSI Logic Configuration Utility program
LSI Logic Configuration Utility is a built-in, menu-driven configuration program that
you can use to:
v Perform a low-level format of a SCSI hard disk drive
v
Set a SCSI device scan order
v Set a SCSI ID for a controller
38
IBM IntelliStation Z Pro Type 6221: Installation Guide