IBM INTELLISTATION E PRO 6214, Руководство пользователя

Страница: 117 / 162

Chapter 6. Solving problems
101
0x02 Explanation: Bad node address (multicast address).
Action: Make sure the locally administered address is valid, if one is specified. The address can not
be a multicast address.
0x03 Explanation: Failed self-test.
Action: Make sure a cable is attached to the Ethernet connector. If the problem persists, call for
service.
0x0D Explanation: Could not allocate enough memory for transmit queues.
Action:
• If you have Windows 2000, do the following:
1. From the Windows 2000 desktop, click Start
→
Control Panel
→
Networks
→
Adapters .
2. Select your IBM Ethernet adapter from the list.
3. Click Properties
→
Advanced .
4. Lower the resource values that apply to the transmit queue.
• If you have Windows XP Professional, do the following:
1. Click Start
→
Control Panel
→
Network Connections
→
Local Area Connection .
2. Select your IBM Ethernet adapter from the list.
3. Click Properties
→
Advanced .
4. Lower the resource values that apply to the transmit queue.
0x0E Explanation: Could not allocate enough memory for receive queue.
Action:
• If you have Windows 2000, do the following:
1. From the Windows 2000 desktop, click Start
→
Control Panel
→
Networks
→
Adapters .
2. Select your IBM Ethernet adapter from the list.
3. Click Properties
→
Advanced .
4. Lower the resource values that apply to the transmit queue.
• If you have Windows XP Professional, do the following:
1. Click Start
→
Control Panel
→
Network Connections
→
Local Area Connection .
2. Select your IBM Ethernet adapter from the list.
3. Click Properties
→
Advanced .
4. Lower the resource values that apply to the transmit queue.
Table 15. NDIS (Windows 2000 or Windows XP) Event Viewer messages for the Ethernet controller.
Error code
(hex)
Description