IBM iL2215, Руководство пользователя

Страница: 26 / 78

Using the on-screen menus
The projector has six drop-down menus that you can use to make image
adjustments and change a variety of settings. Most of these adjustments are
not available directly from the keypad.
Note:
Some menu items might be unavailable at certain times. This indicates
that the item is not applicable to your setup (for example, video
standards do not apply to computer sources) or the item is not enabled
until another selection is made (for example, Manual Tracking is not
available until Auto Image is turned off).
To open the on-screen menus, press the menu button on the keypad or remote
control. This changes the volume, source, and standby buttons on the keypad
to menu navigation buttons
1
(see following illustration). Press the buttons to
move the cursor up, down, left, or right, or use the disk mouse on the remote
control. To select a menu, move the cursor left or right to highlight the menu
that you want. The drop-down menu is displayed.
Display A udio Image C ontrols Language Status
> >
rig tness
C ontrast
int
C olor
S arpness
lan s reen lue
eset all
To change a menu setting, use the source (up) and standby (down) navigation
buttons on the keypad or the disk mouse on the remote control to move the
cursor up and down to the item that you want to change (the selected item is
highlighted), and then use the volume - (left) and (right) navigation
buttons to adjust a setting. Some submenus, such as the Brightness menu,
consist of a slider bar that you use to increase or decrease a value; some
submenus, such as Standby Time menu, consist of options that you scroll
through to select the one that you want. All changes are saved when you
close the menus. To access another menu, use the up and down navigation
buttons or the disk mouse to move back to the top of the current menu, then
use the left and right navigation buttons to move to another menu.
16
iL2215 IBM UltraPortable Data/Video Projector: User’s Guide