IBM iDataPlex dx320 6385, Руководство пользователя

Страница: 39 / 60

Reinstalling a system-board tray in a 2U chassis
To reinstall a system-board tray in a 2U chassis, complete the following steps:
1. Slide the system-board tray into the chassis until it stops and the release
handles click into place.
2. Reconnect the cables on the front of the system-board tray.
3. Turn on the system-board tray (see “Turning on the system-board tray” on page
14).
4. Make sure that the power-on LED on the system-board-tray operator panel is lit
continuously, indicating that the system-board tray is receiving power and is
turned on.
If you have changed the configuration of the system-board tray, you might have to
update the server configuration through the BIOS Setup Utility program. See
“Updating the server configuration” on page 28 for additional information.
Chapter 3. Installing optional devices
27