IBM IBM Infoprint 1572 MICR 50 Скачать руководство пользователя | Manualshive

Страница: 19 / 70

background image

Secure MICR Printer User’s Guide

© Source Technologies

March 2006

15

All Rights Reserved

6. MICR Features

Source Technologies’ Secure MICR Printers are designed to allow both general office
document printing and secure MICR document printing. You may print a variety of
conventional jobs with regular Lexmark toner using all of the printer features available such
as MarkNet and MarkVision network attachment interfaces and network printer utilities.
These printers come standard with HP PCL5, PCL6 and PostScript Level 2 emulations and
others. Source Technologies has designed features to enhance these printers with MICR
mode specific operation that allows you to securely print high quality negotiable documents.

MICR Mode

Your Secure MICR Printer has two operational states: normal and MICR mode. When the
printer is in normal printing mode your MICR resources cannot be accessed. Once the
printer enters into MICR mode your secure resources are available and the printer starts
the process of confirming readiness to print a negotiable document. There are two
conditions which must be met before MICR mode is activated:

If the front panel combination lock feature is activated, the correct eight digit
combination must be entered from the front panel.

The correct password command must be received by the printer from the software
application prior to printing any MICR documents.

MICR Fonts

The E-13B and CMC7 MICR fonts are resident in your printer. Examples of these fonts are
in the Appendix of this manual. They can only be accessed after MICR mode is activated
by your software. A MICR toner cartridge must be present to print the MICR fonts.

Secure Fonts

Two Source Technologies designed secure fonts: Secure Numeric Font and ICR Secure
Numeric Font are resident in your printer. Examples of these fonts are in the Appendix of
this manual. Like the MICR fonts, these secure fonts can only be accessed after MICR
mode is activated by your software.

The ICR Secure Numeric Font is designed for the convenience area of your check. It can
be read by the imaging equipment used by many financial institutions. The Secure
Numeric Font should not be used in this area since the reverse image aspect of this font
prevents it from being read by this equipment. We recommend using both of these fonts on
your checks as they are designed to deter check fraud.

«
...
17
18
19
20
21
...
»

Содержание IBM Infoprint 1572 MICR 50







































































Отзывы:

Нет отзывов

Похожие инструкции для IBM Infoprint 1572 MICR 50

Бренд: Canon Страницы: 29

PIXMA MX410 Series

Бренд: Canon Страницы: 46

Бренд: Canon Страницы: 65

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 2

Sure shot 80 tele

Бренд: Canon Страницы: 39

BJC6500 - BJC 6500 Color Inkjet Printer

Бренд: Canon Страницы: 6

Бренд: Canon Страницы: 20

imagePROGRAF iPF6450

Бренд: Canon Страницы: 35

PIXMA MX340 Series

Бренд: Canon Страницы: 11

PIXMA MX340 Series

Бренд: Canon Страницы: 16

imagePROGRAF iPF6300S

Бренд: Canon Страницы: 12

Бренд: Canon Страницы: 19

Бренд: Canon Страницы: 101

iP4700 - PIXMA Color Inkjet Printer

Бренд: Canon Страницы: 28

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды