IBM HS12 - BladeCenter - 8028, Инструкция по установке и эксплуатации

Страница: 24 / 78

v
You can press the power-control button on the blade server (behind the control
panel door; see “Blade server controls and LEDs” on page 11). This starts an
orderly shutdown of the operating system, if this feature is supported by the
operating system.
v
If the operating system stops functioning, you can press and hold the
power-control button for more than 4 seconds to turn off the blade server.
v The management module can turn off the blade server through the
management-module Web interface. For additional information, see the
IBM
BladeCenter Management Module User’s Guide or go to http://www-03.ibm.com/
systems/management/ for more information.
Blade server connectors
Use this information to locate blade server system-board components and
connectors for optional devices.
The following illustration shows the system-board components, including
connectors for user-installable optional devices, in the blade server.
DIMM 1
DIMM 2
DIMM 3
DIMM 4
DIMM 5
DIMM 6
Storage interface
connector
I/O expansion
option
connectors
Control panel connector
Concurrent KVM connector
(J149)
Expansion unit connector
(J132)
Microprocessor
Storage drive 0
connector
Storage drive 1
connector
14
BladeCenter HS12 Type 8014 or 8028: Installation and User's Guide