background image

Chapter 1. Introduction

The IBM BladeCenter

®

HS12 Type 8014 or 8028 blade server is compatible with

IBM BladeCenter units. This single-wide blade server is ideally suited for Small
and Medium Enterprise (SME) applications, branch office, and departmental
workgroup locations. The IBM BladeCenter HS12 blade server supports one Intel

®

LGA-771 high-performance microprocessor and has six memory-module slots, two
storage-device bays, one Peripheral Component Interconnect eXtended (PCI-X) slot,
a PCI-Express (PCI-E) connector, and a concurrent keyboard/video/mouse (cKVM)
slot.

This blade server supports two model types:

v

Type 8014 supports a fixed-storage device system and has a 1-year warranty

v

Type 8028 supports a hot-swap storage device system and has a 3-year warranty

Note:

Unless otherwise stated, references to the BladeCenter unit apply to all

BladeCenter unit types.

This

Installation and User’s Guide

provides information about:

v

Setting up the blade server

v

Starting and configuring the blade server

v

Installing hardware options

v

Installing the operating system

v

Performing basic troubleshooting of the blade server

Packaged with this document are software CDs that help you to configure
hardware, install device drivers, and install the operating system.

To download the latest device drivers, complete the following steps.

Note:

Changes are made periodically to the IBM Web site. The actual procedure

might vary slightly from what is described in this document.

1.

Go to http://www.ibm.com/systems/support/.

2.

Under

Product support

, click

BladeCenter

.

3.

Under

Popular links

, click

Software and device drivers

.

4.

Click

BladeCenter HS12

to display the matrix of downloadable files for the

blade server.

The blade server comes with a limited warranty. For information about the terms
of the warranty and getting service and assistance, see the

Warranty and Support

Information

document for your blade server on the IBM

Documentation

CD. You can

obtain up-to-date information about the blade server at http://www.ibm.com/
systems/bladecenter/.

If firmware and documentation updates are available, you can download them
from the IBM Web site. The blade server might have features that are not described
in the documentation that comes with the blade server, and the documentation
might be updated occasionally to include information about those features, or
technical updates might be available to provide additional information that is not
included in the blade server documentation.

© Copyright IBM Corp. 2008, 2010

1

Содержание HS12 - BladeCenter - 8028















































































Отзывы: