IBM Flex System EN4132, Руководство пользователя

Страница: 18 / 41

9
Installing the IBM Flex System adapter
If you don’t see the mlx4_en driver, run:
’ modprobe mlx4_en’
Another option is to use the command below to see which modules are active.
Example:
The “Usage: openibd {start|stop|restart|status}” command to modify this file and
thereby control the drivers.
Check the network interface name :
run: ifconfig -a
run: ethtool <interface>
> Host# lsmod |grep mlx4_en
mlx4_en 96382 0
mlx4_core 1184104 2 mlx4_en
Edit ”/etc/infiniband/openib.conf” which modules needs to load
from a service.
Load MLX4_EN module
MLX4_EN_LOAD=yes
> ifconfig –a
eth0 Link encap:Ethernet HWaddr 5C:F3:FC:5F:40:EA
inet addr:10.7.5.170 Bcast:10.7.7.255 Mask:255.255.252.0
inet6 addr: fe80::5ef3:fcff:fe5f:40ea/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20009 errors:0 dropped:0 overruns:0 frame:0
TX packets:4492 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7005902 (6.6 MiB) TX bytes:399581 (390.2 KiB)
> Host# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 1000baseT/Full
10000baseT/Full
Advertised auto-negotiation: N
Speed: 1000Mb/s