IBM Flex System EN4132, Руководство пользователя

Страница: 14 / 41

5
Installing the IBM Flex System adapter
Chapter 2. Installing the IBM Flex System adapter
This chapter provides information and instructions for installing the adapter. See
the documentation that came with the IBM Flex System compute node for the
instructions needed to install the adapter in the node; then, return to this User's
Guide for the information and instructions needed to complete the installation.
Installation of this adapter should only be done by a properly qualified technician
or engineer. Read and follow all safety precautions specified in this document.
Use the documentation supplied with the IBM Flex System chassis to remove and
replace the compute node from the chassis.
1. Remove the cover from the compute node
a. With the compute node sitting on the work table slide the release button,
located on the right-side of the compute node, forward while pressing it
down as well. This action releases the cover of the compute node.
b. Lift the cover from the compute node.
Figure 3: Lift Off Cover
2. The adapter can be placed in either of the two available slots.