IBM Eserver xSeries 455, Часто задаваемые вопросы

Страница: 30 / 46

6. Make sure that the green power LED beside each populated slot is lit.
NO
TE
:
FO
R P
RO
PE
R A
IRF
LO
W,
RE
PL
AC
E F
AN
W
ITH
IN 2
M
INU
TE
S
FR
ON
T O
F B
OX
NO
TE
:
FO
R P
RO
PE
R A
IRF
LO
W,
RE
PL
AC
E F
AN
W
ITH
IN 2
M
INU
TE
S
FR
ON
T O
F B
OX
Tab
Adapter
retention
latch
Attention
LED
Power
LED
Adapter guide
PCI-X
divider
7. Type the following command to verify that the power file contains a value of 1,
which indicates that the PCI slot power is turned on:
# cat power
8. Type the following command to turn off the PCI slot power:
# echo 0 > power
9. Type the following command to verify that the power file contains a value of 0,
which indicates that the PCI slot power is turned off:
# cat power
10. Make sure that the amber attention LED beside the slot that was turned off is
lit and the green power LED is off.
11. Type the following command to verify that the output no longer shows the PCI
adapter that you want to remove:
# lspci -s busnum : slotnum
12. If cables are attached to the adapter that you are removing, disconnect the
cables and remove them from the server.
13. Slide the adapter-retention latch while lifting the tab; then, remove the PCI
adapter.
14. Close the tab; then, make sure that the adapter-retention latch clicks into
place.
24
xSeries 455 FAQ: Hints and Tips