IBM eserver 630 6C4, Руководство по обслуживанию

Страница: 103 / 573

Step 1321-13
From the list of open service action events with FRUs reported, choose the service
action event with the earliest time stamp (the one that occurred first), record its error
code and FRU location(s), and proceed to “Step 1321-14” with this new error code.
When future steps refer to the error code recorded in “Step 1321-1” on page 81, use
this new error code and its location code(s) instead of the original error code that sent
you to this MAP.
Step 1321-14
At the HMC console, open Service Focal Point (SFP) and examine the service action
event log for any closed service action events. For SFP operating instructions, refer to
“Service Focal Point” on page 6.
Step 1321-15
Are there any service action events that are closed?
No Go to the table in “Quick Entry MAP” on page 58.
Yes Go to “Step 1321-16”.
Step 1321-16
Examine the details of the ten most-recently closed service action events.
Are there any error codes or symptoms in the ten latest closed service action
events that are the same as the error code or symptom recorded in “Step 1321-1”
on page 81?
No Go to the table in “Quick Entry MAP” on page 58.
Yes Go to “Step 1321-17”.
Step 1321-17
Examine the FRUs of the same error codes or symptoms. Are there any FRUs in the
same error codes or symptoms of the closed service action events left to be
replaced?
No Go to the table in “Quick Entry MAP” on page 58.
Yes Replace the next FRU of same error codes or symptoms of the closed service
action events. Go to
″
MAP 0410: Repair Checkout
″
in RS/6000
Eserver
pSeries Diagnostic Information for Multiple Bus Systems.
Chapter 3. Maintenance Analysis Procedures (MAPs)
83