IBM eServer 232 xSeries, Руководство пользователя

Страница: 23 / 174

Chapter 1. Introduction
9
Turning on the server
After you plug the power cord of your server into the power supply and an electrical
outlet you can start, the server in several ways:
• You can press the power-control button on the front of the server to start the
server.
• If the server is turned on, a power failure occurs, and unattended- start mode is
enabled in the Configuration/Setup utility program, the server will start
automatically when power is restored.
• If ac power is present, the server is off, and the wake-up feature is enabled in the
Configuration/Setup utility program, the wake-up feature will turn on the server at
the set time.
• If ac power is present, the system is off, and the Wake on LAN feature is enabled,
the system can be turned on by a network wake-up frame from the onboard Intel
Ethernet controller.
• The Integrated System Management Processor can also turn on the server.