IBM DS3500, Инструкция по установке, эксплуатации и обслуживанию

Страница: 127 / 180

a. Press the latch on the end of the drive tray handle to release it, then pull out
the tray handle to the open position.
b. Slide the drive all the way into the empty bay until the drive stops.
c. Push the tray handle into the closed (latched) position.
6. (DS3524 and EXP3524) Install the hard disk drive.
a. Push up the latch on the handle to release it then, pull out the tray handle to
the open position.
b. Slide the drive all the way into the empty bay until the drive stops.
c. Push the tray handle into the closed (latched) position.
7. If you are installing additional drives, wait at least 30 seconds before you install
each drive.
Drive tray
Tray handle
Latch
Hard disk drive
Figure 88. Installing a drive in a DS3512 or EXP3512
Sy stem
Sto
rage
Hard disk
drive status
LED (amber)
Hard disk
drive
assembly
Drive
handle
Release
latch
Hard disk
drive activity
LED (green)
Figure 89. Installing a drive in a DS3524 or EXP3524
Chapter 5. Replacing components
107