IBM DJSA-210 - Travelstar 10 GB Hard Drive, Технические характеристики

Страница: 191 / 211

13.34 Standby Immediate (E0h/94h)
see below Status 1 1 1 0 0 0 0 0 Command
– – – – – – – – Device/Head 1 – 1 D – – – – Device/Head
– – – – – – – – Cylinder High – – – – – – – – Cylinder High
– – – – – – – – Cylinder Low – – – – – – – – Cylinder Low
– – – – – – – – Sector Number – – – – – – – – Sector Number
– – – – – – – – Sector Count – – – – – – – – Sector Count
see below Error – – – – – – – – Feature
– – – – – – – – Data – – – – – – – – Data
7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0 Register
Command Block Input Registers Command Block Output Registers
V – 0 – V 0 V 0 0 0 V 0 0 0 0 0
ERR IDX COR DRQ DSC DF RDY BSY AMN T0N ABT 0 IDN 0 UNC CRC
0 1 2 3
4
5 6 7 0 1 2 3 4 5 6 7
Status Register Error Register
Figure 123. Standby Immediate command (E0h/94h)
The Standby Immediate command causes the device to enter the Standby mode immediately.
When this command is issued, the device confirms the completion of the cached write commands before it
asserts the INTRQ. Following the INTRQ the interface remains active and the device is spun down.
If the device is already spun down, the spin down sequence is not executed.
During the Standby mode the device will respond to commands, however there will be a delay while
waiting for the spindle to reach operating speed.
The Standby Immediate command will not affect the auto power down time-out parameter.
Travelstar 32GH/30GT/20GN hard disk drive specifications
177