manualshive.com logo in svg

IBM Deskstar 120 GXP, Технические характеристики

Поделиться
Скачать
IBM Deskstar 120 GXP Скачать руководство пользователя страница 95

vendor specific information on these reported errors. The error log is not disabled when SMART is
disabled. Disabling SMART disables the delivering of error log information via the SMART READ LOG
SECTOR command.

If a device receives a firmware modification, all error log data is discarded and the device error count for
the life of the device is reset to zero.

9.7.8 

Self-test

The device provides the self-test features which are initiated by SMART Execute Off-line Immediate
command. The self-test checks the fault of the device, reports the test status in Device Attributes Data,
and stores the test result in the SMART self-test log sector as described in the SMART self-test log data
structure. All SMART attributes are updated accordingly during the execution of self-test.

If interrupted by the host during the self-tests, the device services the host command.

If the device receives a firmware modification, all self-test log data is discarded.

Deskstar 120GXP hard disk drive specifications

81

Содержание Deskstar 120 GXP




















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды